Firmware SM-J260MU — Samsung Galaxy J2 Core
Please find direct download link of firmware version J260MUUBS1AVK1 for the device Samsung Galaxy J2 Core, model SM-J260MU below.
- PDA/AP VersionJ260MUUBS1AVK1CSC VersionJ260MUOWO1ATE1MODEM/CP VersionJ260MUUBU1ATE1Build Date2022-11-10Changelist17828293OSOreoOS Version8.1.0
COO-J260MUUBS1AVK1-20230103102221.zip
Changes:
· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.