Firmware SM-J260GU — Samsung Galaxy J2 Core
Please find direct download link of firmware version J260GUDDS1AVK2 for the device Samsung Galaxy J2 Core, model SM-J260GU below.
- PDA/AP VersionJ260GUDDS1AVK2CSC VersionJ260GUODM1ATF2MODEM/CP VersionJ260GUDDS1ATF1Build Date2022-12-07Changelist17923443OSOreoOS Version8.1.0
SLI-J260GUDDS1AVK2-20230113185604.zip
Changes:
• Security
The device is protected with improved security.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.