Firmware SM-J3300 — Samsung Galaxy J3
Please find direct download link of firmware version J3300ZCS4CUE1 for the device Samsung Galaxy J3, model SM-J3300 below.
- PDA/AP VersionJ3300ZCS4CUE1CSC VersionJ3300CHC4CUE1MODEM/CP VersionJ3300ZCS4CUE1Build Date2021-05-10Changelist16655309OSPieOS Version9
CHC-J3300ZCS4CUE1-20210518164834.zip
Changes:
- The latest Android security patch has been applied.
ㆍDevice security has been further enhanced.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.