Firmware SM-G975U1 — Samsung Galaxy S10+
Please find direct download link of firmware version G975U1UEU6GUJ3 for the device Samsung Galaxy S10+, model SM-G975U1 below.
- PDA/AP VersionG975U1UEU6GUJ3CSC VersionG975U1OYM6GUJ3MODEM/CP VersionG975U1UEU6GUJ3Build Date2021-10-13Changelist22341008OSROS Version11
XAA-G975U1UEU6GUJ3-20211110132500.zip
Changes:
• Overall stability of functions improved.
• The security of your device has been improved.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.