Firmware SM-G973U1 — Samsung Galaxy S10
Please find direct download link of firmware version G973U1UEU6IVH1 for the device Samsung Galaxy S10, model SM-G973U1 below.
- PDA/AP VersionG973U1UEU6IVH1CSC VersionG973U1OYM6IVH1MODEM/CP VersionG973U1UEU6IVH1Build Date2022-08-01Changelist23725627OSROS Version11
SPR-G973U1UEU6IVH1-20220902183641.zip
Changes:
• Overall stability of your device has been improved.
• The security of your device has been improved.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.