Firmware SM-G9980 — Samsung Galaxy S21 Ultra 5G
Please find direct download link of firmware version G9980ZHU2AUBB for the device Samsung Galaxy S21 Ultra 5G, model SM-G9980 below.
- PDA/AP VersionG9980ZHU2AUBBCSC VersionG9980OZS2AUBBMODEM/CP VersionG9980ZCU2AUBCBuild Date2021-02-26Changelist20700993OSROS Version11
BRI-G9980ZHU2AUBB-20210308123341.zip
Changes:
The exact changes may differ depending on your device model, country/Region, and service provider.
• Other bug fixes
- The stability of call has been improved.
• The latest Android security patch has been applied.
- Device security has been further enhanced.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.