Firmware SM-S908B — Samsung Galaxy S22 Ultra
Please find direct download link of firmware version S908BXXS2BWA2 for the device Samsung Galaxy S22 Ultra, model SM-S908B below.
- PDA/AP VersionS908BXXS2BWA2CSC VersionS908BOXM2BVL1MODEM/CP VersionS908BXXU2BVL1Build Date2023-01-09Changelist25579026OSTOS Version13
MOB-S908BXXS2BWA2-20230119151531.zip
Changes:
• The security of your device has been improved.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.