Firmware GT-I9301I — Samsung Galaxy S3 Neo+
Please find direct download link of firmware version I9301IXXSAPG5 for the device Samsung Galaxy S3 Neo+, model GT-I9301I below.
- PDA/AP VersionI9301IXXSAPG5CSC VersionI9301IEURANH1MODEM/CP VersionI9301IXXUAPG1Build Date2016-07-19Changelist6004186OSKitKatOS Version4.4.2
EUR-I9301IXXSAPG5-20160810123420.zip
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.