Firmware SM-G903F — Samsung Galaxy S5 Neo
Please find direct download link of firmware version G903FXXU2BRH2 for the device Samsung Galaxy S5 Neo, model SM-G903F below.
-
PDA/AP VersionG903FXXU2BRH2CSC VersionG903FBOG2BRI1MODEM/CP VersionG903FXXU2BRH2Build Date2018-08-23Changelist14252124OSMarshmallowOS Version6.0.1
BOG-G903FXXU2BRH2-20190627094345.zip
Changes:
· The security of your device has been improved.
· The stability of Samsung Cloud has been improved.
· GDPR has been added.(General Data Protection Regulation)
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.