Firmware SM-G955W — Samsung Galaxy S8+
Please find direct download link of firmware version G955WVLU8CUF3 for the device Samsung Galaxy S8+, model SM-G955W below.
- PDA/AP VersionG955WVLU8CUF3CSC VersionG955WOYA8CUF3MODEM/CP VersionG955WVLU8CUF3Build Date2021-06-17Changelist18800027OSPieOS Version9
XAC-G955WVLU8CUF3-20210713150321.zip
Changes:
· The security of your device has been improved.
※ If your device is encrypted, it must be decrypted before upgrading.
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.