Firmware GT-I9308 — Samsung Galaxy S 3 (China)
Please find direct download link of firmware version I9308ZMUBNI1 for the device Samsung Galaxy S 3 (China), model GT-I9308 below.
- PDA/AP VersionI9308ZMUBNI1CSC VersionI9308CHMBNI1MODEM/CP VersionI9308ZMUBML2Build Date2014-09-29Changelist2784444OSJelly BeanOS Version4.3
CHM-I9308ZMUBNI1-20141030154559.zip
Changes:
1. 系统更新(Android 4.3)
2. 添加了新功能
3. 与Galaxy Gear兼容
4. 改善了性能(图像、多媒体、蓝牙等)
5. 改善了用户界面并提高了稳定性
6. 用户界面调整(图标变更等)
7. 安全性增强
8. 安卓4.3及以上版本将删除安全邮箱功能，升级后存储在安全邮箱内的信息将被删除，且无法恢复。
因此进行系统升级前，请把安全邮箱内的信息移动到一般信息箱内
（移动方法：信息 → 菜单键 → 安全邮箱 → 选择信息 → 菜单键 → 移动到信息）
Flashing requirements:
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
- Odin Tool
- Samsung device drivers (Download)
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.